|
Select a product category:
|
|
|
RCB8530
Rebate Cutter Block
|
Spindle moulder cutter block, specifically designed for rebating. Fits any moulder with a 30mm diameter spindle.
The cutterblock has 2, double edged, planing knives and 4 spur cutters. The spur cutters give a clean crisp edge to the internal corner when rebating. The spurs can removed if required.
We also include a ring fence, which consists of a bearing with 30mm bore and an 85mm collar to run the work piece along. It is used for flush trimming, for example trimming off veneers and laminates after they have been applied to a board.
The ring fence can be removed from the bearing. The outer diameter of the bearing is 55mm, which gives a rebating depth of 15mm when the bearing guide is mounted above the cutterblock.
The rebate block can be used for cutting curved timber, but should only be used with an appropriate guard fitted to the moulder.
The block is supplied in a foam lined aluminium storage case to keep it safe.
The cutting knives are double edged and replacements are supplied as a pair.
the spur cutters have 4 points and replacements are supplied as a set of 4.
|
Specification:
|
Diameter |
85mm |
Height |
50mm |
Bore |
30mm |
Rebating Knives |
2 |
Spur Cutters |
2 Top, 2 Bottom |
Maximum rebate cut |
25mm |
Guide Bearing Diameter / Cutting Depth |
55mm / 15mm |
Ring Fence Diameter |
85mm |
|
