Products

W012 Bench Top Router Table

Bench Top Router Table
Bench Top Router Table Supplied With Cross Cutting Mitre Fence 2 Vertical Clamps Hold The Work Piece Down Against The Table Feather Board Holds Work Piece Against The Fence Dust Extraction Outlet 40mm For Connecting To A Suitable Extractor Edge Moulding On The W012 Router Table Trenching Or Grooving On The W012 Router Table Router Is Fixed To The Insert Plate Additional Runners Can Be Use To Increase The Height For Tall Routers Optional NVR Switch Available


EAN: 5060281690364
5 5 2 Product
Common price: £ 59.00 Our price: £ 64.00 (Inc VAT)
(£ 53.33 excl VAT)
Shipping Area: UK & Europe
UK Mainland Only: Due to shipping restrictions, such as being hazardous or oversized goods, we can only ship this item to UK Mainland addresses.

UK & Ireland: We can ship this product to any address within the UK or Republic of Ireland. We cannot ship to other areas.

UK & Europe: We can ship this product to any address within the UK or the following countries: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourgh, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden. If your country is not on this list, sorry we cannot currently ship to you.

Collect In Store: This item cannot be shipped, it is available for collection ONLY.
Product is out of stock. Back in stock: 26th July 2020 Notify me when available
+
Add to wishlist

Bench top universal router table for use with any 1/4" router.

  • Will Accept Any 1/4" Router
  • Melamine Faced MDF Table
  • 2 Vertical Hold Down Clamps
  • Horizontal Feather Board
  • Cutter Guard
  • 40mm Diameter Dust Collection Outlet

A router table will convert a hand held plunging router into a stationary tool which is safer to use and quicker to set up than using freehand. Ideally suited for all 1/4" sized routers, this compact router table will perform a variety of jobs such as edge moulding, trenching and cutting tenons.

The side frames are steel with a smooth melamine faced MDF table across the top. The insert plate, which must be drilled to suit your routers fixing points, is made from a tough plastic with an aperture in the centre for the cutter.  

The fence arrangement is simple and effective. The three clamps supplied as standard will hold the workpiece securely down against the table and up against the cutter leaving the operator to merely feed the timber through from right to left. A perspex guards protects the operator from flying chips and a dust chute is included for connecting to a vacuum or extractor. A sliding mitre fence, with a replaceable wooden face, completes the standard equipment.

Suitable for use with router cutters up to 35mm diameter.

The table can be used with any router which has a faceplate diameter of up to 190mm. This covers all 1/4" shank routers and even some 1/2" shank routers can be used.

The height under the table is 260mm. If your router is taller than this, you will need to make 2 runners to go underneath the side legs to lift the table up, to accommodate the extra height. (For Example; the Trend T4 router requires side runners of 60mm in height)

Supplied with tough plastic insert plate, adjustable fence with two replaceable wooden faces, horizontal feather board, two vertical clamps and sliding mitre fence.

Specification 

Table size 430mm x 400mm
Table height 290mm
Table thickness 20mm
Table aperture 35mm
Height Under Table 260mm
Maximum Faceplate Diameter 190mm
Mitre Guide Slot (W x D) 15mm x 8.5mm
Dimensions (WxDxH) 430mm x 400mm x 450mm
Weight 8kg
Rating Hobby
Warranty 1 Year

The optional NVR safety switch can be attached to the right hand leg to give a more convenient method of starting and stopping the router, rather than reaching underneath the table.

Related Products:

Bench Top Router Table W012 £ 64.00 (Inc VAT)
(£ 53.33 excl VAT)
Product is out of stock.
+
Add to wishlist
NVR Safety Switch 240v W026 £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is out of stock.
+
Add to wishlist
Igaging Digital Snap Check Gauge 35-0907 £ 27.00 (Inc VAT)
(£ 22.50 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist

Customer Reviews:

James Williams
No problems so far. Set it up yesterday to make biscuit grooves in some reclaimed maple flooring for some window sills I'm doing and it coped really well. Easy to set up and small enough to tuck away when not in use.

Keith Walker
Superb service. Ordered on the Tuesday arrived on the Wednesday morning. Great little Router table. Well Chuffed.

Sign up to our e-mail news service and we’ll keep you up to date with our products, special offers and any demonstration days in you area. You can unsubscribe from our newsletter at any time.

Company Information

Address

Charnwood Machinery Ltd.
Cedar Court, Walker Road,
Hilltop Industrial Estate, Bardon,
Leicestershire, England, LE67 1TU

Phone Number

01530 516 926

Fax

01530 516 929

Email Address

This email address is being protected from spambots. You need JavaScript enabled to view it.