Products

V3FJ5 Bowl Reversing Jaws 5" Diameter for Viper3 Chuck

Flat Jaws For Mounting Small Bowls
Flat Jaws For Mounting Small Bowls Dimensions Viper Woodworking Lathe Chucks


EAN: 5060281697684
Common price: £ 25.00 Our price: £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Shipping Area: UK & Europe
UK Mainland Only: Due to shipping restrictions, such as being hazardous or oversized goods, we can only ship this item to UK Mainland addresses.

UK & Ireland: We can ship this product to any address within the UK or Republic of Ireland. We cannot ship to other areas.

UK & Europe: We can ship this product to any address within the UK or the following countries: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourgh, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden. If your country is not on this list, sorry we cannot currently ship to you.

Collect In Store: This item cannot be shipped, it is available for collection ONLY.
Product is in stock.
+
Add To Basket Add to wishlist

Bowl Reversing Jaws 5" Diameter for Viper3 Chuck.

Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks.

The outside edge of the jaws are 120mm diameter when closed, 155mm diameter when opened. The work piece is held in place by 8 rubber coated fixings which can be fitted in 3 different positions, in 12mm intervals, depending on the diameter required. A chuck with minimum Jaw travel of 24mm is therefore required to use these jaws.

For bowl diameters from 54mm up to 125mm.
Please note max. rpm 600.

Supplied with 2 sets of rubber coated fixings;

8 x 10mm diameter x 17mm long
8 x 10mm diameter x 13mm long

 Jaws for the Viper3 are compatible with the following chucks:

  • Charnwood W836 (Requires V3JS jaw screw set)
  • Vicmark VM100 (Requires V3JS jaw screw set)
  • Record RP4000
  • Rutlands Dakota XT700
  • Warco 9405
  • Craft Supplies CS400
  • Fox FX4000
  • Versachuck (Requires VM100 Jaw Carriers)

 

Related Products:

Bowl Reversing Jaws 5" Diameter for Viper3 Chuck V3FJ5 £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Bowl Reversing Jaws 8" Diameter for Viper3 Chuck V3FJ8 £ 35.00 (Inc VAT)
(£ 29.17 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Bowl Reversing Jaws 10" Diameter for Viper3 Chuck V3FJ10 £ 45.00 (Inc VAT)
(£ 37.50 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Set of 16 spare rubber pads for Flat Jaws VIPERFJR £ 10.00 (Inc VAT)
(£ 8.33 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Dovetail Jaws, serrated inside for Viper3 Chuck V3DJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Pin Jaws for Viper3 Chuck V3PJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Internal Step Jaws for Viper3 Chuck V3ISJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Power Grip Jaws for Viper3 Chuck V3PGJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Long Nose Jaws for Viper 3 Chuck V3LNJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Jumbo Jaws for Viper3 Chuck V3JJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Round Jaws, serrated both sides for Viper3 Chuck V3RJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Stepped Jaws for Viper3 Chuck V3SJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is out of stock.
+
Add to wishlist
Wide Jaws for Viper3 Chuck V3WJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Ripple Jaws for Viper3 Chuck V3RPJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Pen Blank Jaws, square hole inside for Viper3 Chuck V3EDJ £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Face Plate Ring for Viper3 Chuck V3FP £ 10.00 (Inc VAT)
(£ 8.33 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Indexing Plate for Viper3 Chuck V3IP £ 8.00 (Inc VAT)
(£ 6.67 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Aluminium Case V3ALU £ 16.00 (Inc VAT)
(£ 13.33 excl VAT)
Product is out of stock.
+
Add to wishlist
Set of Jaw Screws V3JS £ 3.50 (Inc VAT)
(£ 2.92 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Wood Screw For Viper3 or Viper5 Chuck V3WS £ 10.00 (Inc VAT)
(£ 8.33 excl VAT)
Product is out of stock.
+
Add to wishlist
4 Prong Drive Centre for Chucks VIPERDC £ 15.00 (Inc VAT)
(£ 12.50 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Crown Drive Centre For Chucks, 12mm diameter CDC12 £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Crown Drive Centre For Chucks 25mm diameter CDC25 £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Extension T-Handle for Viper Chucks VIPERTH £ 10.00 (Inc VAT)
(£ 8.33 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist

Customer Reviews:

No comments have been posted yet.

Sign up to our e-mail news service and we’ll keep you up to date with our products, special offers and any demonstration days in you area. You can unsubscribe from our newsletter at any time.

Company Information

Address

Charnwood Machinery Ltd.
Cedar Court, Walker Road,
Hilltop Industrial Estate, Bardon,
Leicestershire, England, LE67 1TU

Phone Number

01530 516 926

Fax

01530 516 929

Email Address

This email address is being protected from spambots. You need JavaScript enabled to view it.