Products

MC420 1 Micron Clean Air Filter, 400m3/h

1 Micron Clean Air Filter, 400m3/h
1 Micron Clean Air Filter, 400m3/h Hanging Chains Included Integral On/Off Switch Swiss Made High Quality Motor Easy To Replace Filter Clean Air Filter


EAN: 5060486046287
Common price: £ 235.00 Discontinued Shipping Area: UK & Europe
UK Mainland Only: Due to shipping restrictions, such as being hazardous or oversized goods, we can only ship this item to UK Mainland addresses.

UK & Ireland: We can ship this product to any address within the UK or Republic of Ireland. We cannot ship to other areas.

UK & Europe: We can ship this product to any address within the UK or the following countries: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourgh, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden. If your country is not on this list, sorry we cannot currently ship to you.

Collect In Store: This item cannot be shipped, it is available for collection ONLY.
Product is out of stock. Notify me when available
+
Add to wishlist

DISCONTINUED AUGUST 2020

This product is no longer available to order, but replacement filters are still available.

Micro clean air filters are designed to remove airborne dust particles from the air in the workshop. They are compact, lightweight and very quiet in operation. They are capable of running for long periods of time while you work, and for best results, left running for a period after the dust producing activity has finished.

When in operation they quietly clean and filter the air, trapping dust particles in the filter medium. Most woodworkers will have had experience of leaving the workshop nice and tidy, but then the next day discovering a layer of dust has settled on all horizontal surfaces overnight. The micro clean is designed to prevent completely or drastically minimise that phenomenon.

An air cleaner should be used in conjunction with a dust extractor for maximum dust control.

It is recommended that the air in the workshop is filtered by the micro clean 10 times per hour (minimum recommended level is 6 times per hour). Measure the three dimensions to calculate the cubic volume of your workshop, then check which size of air filter is most suitable.

Manufactured in the UK using high quality components throughout. The filter is made of EU4 grade, non-woven, thermally bonded polyester fibres, which means it will filter out 95% of all dust at 2 microns or larger, 80% of dust down to 1 micron and 65% of dust down to 0.4 micron. The filters are low cost and very easy to replace. As a general rule-of thumb filters should be regularly checked and replaced every 6-12 months. The highly reliable motors are Swiss made to a very exacting standard. Thermally protected and most important to woodworkers they are spark proof, so less chance of dust combustion. Ingress protected to IP44 standard.

MC420 has an airflow rate of 400 cubic metres per hour. Therefore it is suitable for a workshop with a volume of up to 40 cubic metres, roughly equal to a single garage. For example: Floor area 6m (20’) x 3m (10’) x height 2.2m (9’).

Designed to be suspended from the ceiling in the centre of the room or located directly overhead of where the dust is produced. Dust contaminated air is drawn into the bottom and side of the filter, through the filter media which traps the dust within, then clean air is expelled out through the vents around the top of the unit. Supplied with hanging chain, 1m power cable and plug.

MC420 Specification

Motor 60w, 240v
Flowrate 400m3/hour
Max. Workshop Size 40m2
Filtration Efficiency 95% @ 2 micron
  80% @ 1 micron
  65% @ 0.4 micron
Dust Holding Capacity 500g/m2
Noise Level 64db
Dimensions (WxDxH) 205 x 205 x 250mm 
Weight

4kg

Rating 

Hobby

Warranty

1 Year

EAN Barcode Number

5060486046287

Related Products:

1 Micron Clean Air Filter, 400m3/h MC420 Discontinued Product is out of stock.
+
Add to wishlist
Replacement Filter Set For MC420 MCF420 £ 16.00 (Inc VAT)
(£ 13.33 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist

Customer Reviews:

No comments have been posted yet.

Sign up to our e-mail news service and we’ll keep you up to date with our products, special offers and any demonstration days in you area. You can unsubscribe from our newsletter at any time.

Company Information

Address

Charnwood Machinery Ltd.
Cedar Court, Walker Road,
Hilltop Industrial Estate, Bardon,
Leicestershire, England, LE67 1TU

Phone Number

01530 516 926

Fax

01530 516 929

Email Address

This email address is being protected from spambots. You need JavaScript enabled to view it.