W629 10'' Cast Iron Table Saw

10" Cast Iron Table Saw With Quick Action Rip Fence
10" Cast Iron Table Saw With Quick Action Rip Fence Ripping Capacity of 730mm 80mm cutting Depth Capacity Blade Tilts To 45 Degrees 100mm Diameter Dust Extraction Outlet Sliding Carriage With Screw Down Work Clamps Sliding Carriage Runs On 4 Bearings Mitre Guide Has 2 Faces, Runs In A T-slot The Sliding Carriage Can Used On Either Side Of The Table Alternate Configuration: Extension Tables On Each Side Of the Blade, Without Sliding Carriage

EAN: 5060281699978
5 5 1 Product
Common price: £ 678.99 Our price: £ 799.00 (Inc VAT)
(£ 665.83 excl VAT)
Shipping Area: UK & Ireland
UK Mainland Only: Due to shipping restrictions, such as being hazardous or oversized goods, we can only ship this item to UK Mainland addresses.

UK & Ireland: We can ship this product to any address within the UK or Republic of Ireland. We cannot ship to other areas.

UK & Europe: We can ship this product to any address within the UK or the following countries: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourgh, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden. If your country is not on this list, sorry we cannot currently ship to you.

Collect In Store: This item cannot be shipped, it is available for collection ONLY.
Product is in stock.
Add To Basket Add to wishlist

Cast Iron Table Saw with a 10" diameter blade. The 2018 Model is now available with an upgraded quick action precision rip fence. 

  • Quiet Induction Motor with Brake
  • Cast Iron Precision Ground Table
  • Extension Tables as Standard Equipment
  • Sliding Carriage as Standard Equipment
  • Separate Handwheels for Blade Adjustment
  • Quick Action Precision Rip Fence
  • 100mm Dust Extraction Outlet
  • Solid Floorstand Base Included
  • Optional Wheel Kit Available

First launched in 2015, the W629 has now become our best selling table saw model. The cutting capacities are big enough for any hobby workshop, providing a level of accuracy only normally found on industrial machinery, with a compact foot print suited to the average sized workshop. 

The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy.

Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a pleasure to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts.
Supplied with 36 tooth TCT sawblade, sliding carriage, extension tables, sliding mitre fence, floorstand, adjustable feet, cable and plug.

There are 3 ways to configure the table saw:
The sliding carriage can be fitted on either side of the blade so that you can work on the left or right.
If you are not using the sliding carriage, you can fit one extension table on either side of the blade.

For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required.


Main Table Size 420mm x 635mm
Table Size (with Extensions) 1000mm x 635mm
Maximum Ripping Width Using Fence 730mm
Crosscut Table Size 400mm x 180mm
Maximum Crosscutting Width 500mm (680mm using reverse table)
Blade Tilt 90 - 45 degrees
Cutting Depth at 90 degrees 80mm
Cutting Depth at 45 degrees 64mm
Blade Diameter 250mm
Blade Bore 30mm
Work Table Height 845mm
Mitre Guide T-Slot Width 15/19mm
Mitre Guide T-Slot Depth 7mm
Motor (induction) Braked 2200w (3hp) / 240v
No-Load Blade Speed 4000 rpm
Minimum Blade Width (Kerf) 3.0mm
Dimensions (WxDxH) 1480mm x 1000mm x 1100mm
Weight 110Kg
Rating Light Trade
Warranty 1 Year

 It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips. The hose kit supplied collects dust from the sawguard and takes it to the single 100mm diameter hose connection point at the back of the machine.

Please note: It is not possible to use a stacked dado set with this saw. 



Related Products:

Trend 250mm (10'') Diameter x 24 Teeth CSB/25024 £ 25.68 (Inc VAT)
(£ 21.40 excl VAT)
Product is in stock.
Add To Basket
Trend 250mm (10'') Diameter x 30 Teeth CSB/25030 £ 33.26 (Inc VAT)
(£ 27.72 excl VAT)
Product is out of stock.
Trend 250mm (10'') Diameter x 48 Teeth CSB/25048 £ 34.79 (Inc VAT)
(£ 28.99 excl VAT)
Product is in stock.
Add To Basket
Trend 250mm (10'') Diameter x 60 Teeth CSB/25060 £ 36.92 (Inc VAT)
(£ 30.77 excl VAT)
Product is out of stock.
Trend 250mm (10'') Diameter x 80 Teeth CSB/25080 £ 41.20 (Inc VAT)
(£ 34.33 excl VAT)
Product is in stock.
Add To Basket
Universal Wheel Base W522 £ 59.00 (Inc VAT)
(£ 49.17 excl VAT)
Product is in stock.
Add To Basket

Customer Reviews:

No comments have been posted yet.

Submit a review of this product:

Customer Rating:
Your Name:

Sign up to our e-mail news service and we’ll keep you up to date with our products, special offers and any demonstration days in you area. You can unsubscribe from our newsletter at any time.

Company Information


Charnwood Machinery Ltd.
Cedar Court, Walker Road,
Hilltop Industrial Estate, Bardon,
Leicestershire, England, LE67 1TU

Phone Number

01530 516 926


01530 516 929

Email Address

This email address is being protected from spambots. You need JavaScript enabled to view it.