B300 12'' Premium Woodworking Bandsaw

Premium Quality Trade Bandsaw
Premium Quality Trade Bandsaw Lower Bearing Guide Assembly For Accurate Straight Cuts Simple To Adjust Bearing Guides For Accurate Blade Control Designed For Use With Multiple Sizes Of Extraction Hose Built In Dust Collection Draw Simplifies Machine Cleaning Work Area Will Always Be Well Lit Table Tilts To 45 Degrees For Bevel Cuts Built In Holder For Service Tools Window To Blade Tension Indicator Quick Release Blade Tension For Fast Blade Changing

EAN: 5060281698322
Common price: £ 459.00 Our price: £ 639.00 (Inc VAT)
(£ 532.50 excl VAT)
Product is out of stock. Back in stock: 6th May 2021 Notify me when available
Add to wishlist

Premium Grade 12'' Woodworking Bandsaw.

  • 6'' Cutting Depth Capacity
  • 12'' Cutting Width (Throat)
  • Supplied with High Quality British Made Blade
  • Precision Ground Cast Iron Work Table
  • Quick Action Locking On Rip Fence
  • Crosscutting Mitre Guide Included
  • Quiet Induction Motor
  • Mains Powered LED work Light
  • Integral Dust Collection Tray
  • Includes Floorstand
  • Primarily used for Woodworking

A floorstanding woodworking bandsaw with a cutting capacity of 150mm (6"), big enough for most workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B300 has three bearings on the blade guard. The two sealed bearings mounted side-on to the blade, control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.

The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit.

The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. 

Tensioning the blade correctly is made simple thanks to the features on this premium model. A blade tension lever quickly sets the tension. After a blade change fine tuning can be carried out with the aid of a tension indicator and scale. The required tension varies according to blade width. A window in the top door allows the operator to confirm blade tension is correct and make an adjustment when necessary.

A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.

Supplied with 1/2'' x 4tpi blade, rip fence, mitre fence, work light, floorstand, 2.0m power cable and UK 3 pin plug. 

This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.

B300 Specification

Maximum cutting depth 165mm (6")

Throat width

305mm (12")
Max. cutting width with fence 185mm Left / 180mm Right
Table size 480mm x 390mm
Table Height 1000mm
Table tilt 0-45 degrees
Mitre Guide T-Slot (x2) 16mm / 20mm
Cutting speed 800 & 370m/min
Motor (induction) 750w (1hp)
Blade length 2240mm
Blade widths 6-20mm (1/4" - 3/4")
Dimensions (WxDxH) 790mm x 580mm x 1600mm
Weight 67Kg
Assembly Time Required 45 Minutes (Needs 2 People)
Rating Light Trade
Warranty 1 Year

The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. The blade supplied can also cut Non-ferrous metals, Plastic and Acrylic. It is possible to use this bandsaw for cutting other materials, but only with a suitable blade fitted.

Related Products:

12'' Premium Woodworking Bandsaw B300 £ 639.00 (Inc VAT)
(£ 532.50 excl VAT)
Product is out of stock.
Add to wishlist
Bandsaw Blade 2240mm x 6mm x 6tpi to fit W721 & B300 BB15 £ 12.00 (Inc VAT)
(£ 10.00 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Bandsaw Blade 2240mm x 13mm x 4tpi to fit W721 & B300 BB16 £ 12.00 (Inc VAT)
(£ 10.00 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Bandsaw Blade 2240mm x 16mm x 4tpi to fit W721 & B300 BB18 £ 16.00 (Inc VAT)
(£ 13.33 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Bandsaw Blade 2240mm x 19mm x 4tpi to fit W721 & B300 BB17 £ 17.00 (Inc VAT)
(£ 14.17 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Universal Wheel Base W522 £ 69.00 (Inc VAT)
(£ 57.50 excl VAT)
Product is out of stock.
Add to wishlist

Customer Reviews:

No comments have been posted yet.

Sign up to our e-mail news service and we’ll keep you up to date with our products, special offers and any demonstration days in you area. You can unsubscribe from our newsletter at any time.

Company Information


Charnwood Machinery Ltd.
Cedar Court, Walker Road,
Hilltop Industrial Estate, Bardon,
Leicestershire, England, LE67 1TU

Phone Number

01530 516 926


01530 516 929

Email Address

This email address is being protected from spambots. You need JavaScript enabled to view it.