B350 14'' Premium Woodworking Bandsaw

Premium Quality Trade Bandsaw
Premium Quality Trade Bandsaw Accurate Blade Control With Minimum Set-Up Time Window To Blade Tension Indicator Quick Lock Rip Fence With Scale Reader Table Tilts To 45 Degrees For Bevel Cuts Quick Release Blade Tension For Fast Blade Changing Work Area Will Always Be Well Lit Designed For Use With Multiple Sizes Of Extraction Hose Built-In Dust Collection Draw Simplifies Machine Cleaning Oprional Wheel Kit Available

EAN: 5060281698339
4.5 5 4 Product
Common price: £ 599.00 Our price: £ 799.00 (Inc VAT)
(£ 665.83 excl VAT)
Product is in stock.
Add To Basket Add to wishlist

Premium Grade 14'' Woodworking Bandsaw.

  • 9'' Cutting Depth Capacity
  • 14'' Cutting Width (Throat)
  • Supplied with High Quality British Made Blade
  • Precision Ground Cast Iron Work Table
  • Quick Action Locking On Rip Fence
  • Crosscutting Mitre Guide Included
  • Quiet Induction Motor
  • Mains Powered LED work Light
  • Integral Dust Collection Tray
  • Includes Floorstand
  • Primarily used for Woodworking

The bigger brother of the B300, this floorstanding woodworking bandsaw has a cutting capacity of 230mm (9"), to satisfy professional workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B350 has three bearings on the blade guard. Two sealed bearings mounted side-on to the blade, control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.

The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit.

The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. 

Tensioning the blade correctly is made simple thanks to the features on this premium model. A blade tension lever quickly sets the tension. After a blade change fine tuning can be carried out with the aid of a tension indicator and scale. The required tension varies according to blade width. A window in the top door allows the operator to confirm blade tension is correct and make an adjustment when necessary.

A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.

Supplied with 1/2'' x 4tpi blade, rip fence, mitre fence, work light, floorstand, 2.0m power cable and UK 3 pin plug. 

This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.


Maximum cutting depth 230mm (9")

Throat width

345mm (14")
Max. cutting width with fence 215mm Left / 215mm Right
Table size 545mm x 515mm
Table Height 1020mm
Table tilt 0-45 degrees
Mitre Guide T-Slot (x2) 16mm / 20mm
Cutting speed 800 & 370m/min
Motor (induction) 1100w (1.1/2hp)
Blade length 2560mm
Blade widths 6-25mm (1/4" - 1")
Dimensions (WxDxH) 900mm x 720mm x 1720mm
Weight 75Kg
Assembly Time Required 60 Minutes (Needs 2 People)
Rating Light Trade
Warranty 1 Year

The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. The blade supplied can also cut Non-ferrous metals, Plastic and Acrylic. It is possible to use this bandsaw for cutting other materials, but only with a suitable blade fitted.

Related Products:

14'' Premium Woodworking Bandsaw B350 £ 799.00 (Inc VAT)
(£ 665.83 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Bandsaw Blade 2560mm x 6mm x 6tpi to fit W730 & B350 BB32 £ 13.00 (Inc VAT)
(£ 10.83 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Bandsaw Blade 2560mm x 10mm x 6tpi to fit W730 & B350 BB33 £ 13.00 (Inc VAT)
(£ 10.83 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Bandsaw Blade 2560mm x 13mm x 4tpi to fit W730 & B350 BB34 £ 14.00 (Inc VAT)
(£ 11.67 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Bandsaw Blade 2560mm x 20mm x 4tpi to fit W730 & B350 BB36 £ 19.00 (Inc VAT)
(£ 15.83 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Bandsaw Blade 2560mm x 25mm x 3tpi to fit B350 BB38 £ 25.00 (Inc VAT)
(£ 20.83 excl VAT)
Product is in stock.
Add To Basket Add to wishlist
Universal Wheel Base W522 £ 69.00 (Inc VAT)
(£ 57.50 excl VAT)
Product is in stock.
Add To Basket Add to wishlist

Customer Reviews:

Stuart Graham
Recently purchased a B350 14" Bandsaw. Ordered one day, delivered lunchtime the next day! Assembled that afternoon and fitted some castors that I had lying around (space at a premium). The saw was purchased as a replacement for a smaller Axminster one as I have purchased a larger lathe. Excellent machine! I think I've used it every day for heavy "hobby use" day since I bought it. For me well worth the money and I wish I'd bought it ages ago!! Looking forward to makings some jigs to compliment it and enjoying a lot more happy hours using it. I would certainly recommend it if you are in the market for one.

Edward Pennington-Ridge
For the money, this is an astounding saw. It is not perfect, but the price means a 5 star rating. I have never had a way to produce clean boards from the trees that I fell in our woodland in my shop, and this saw has changed that. The feeling I experienced having produced my first 1.5 M x 225mm x 25mm Cherry board, dimensionally accurate to less than 1mm top to bottom, is hard to explain! My very first cut was a perfect 100mm x 1.5mm veneer, using a 25mm 3tpi blade. The saw itself has a real quality feel. Thick steel sheet and box section has been used throughout, and the blade and belt tensioning are well thought out. The fixings supplied are good quality. Putting the saw together was a great experience, unlike so many tools these days. The work light is fabulous, and the fence and table good enough for me. The table edges are not ground, but this is a minor gripe and fixable with sufficient motivation. The leg stand is just about good enough. There is a significant amount of flex, and I plan to make my own 25 mm plywood box stand in the near future. The one thing that this saw needs as an optional extra is better quality blade guides, with quality cast iron or steel bodies. Some of the threads in the supplied guides are not quite as straight as they should be. Adjustment is not quite as slick as I would like. Having said that, given patience setting up, I am achieving extremely accurate cuts with this saw. If Charnwood offered a guide upgrade for £75 or so then I would gladly buy it. If not, I shall probably end up making my own on the mill. I was going to spend over £1K at Axminster for a saw I suspect would have been inferior, and wish that I had bought my table saw at Charnwood. I shall be recommending Charnwood to my friends. Overall, very impressed.

Sign up to our e-mail news service and we’ll keep you up to date with our products, special offers and any demonstration days in you area. You can unsubscribe from our newsletter at any time.

Company Information


Charnwood Machinery Ltd.
Cedar Court, Walker Road,
Hilltop Industrial Estate, Bardon,
Leicestershire, England, LE67 1TU

Phone Number

01530 516 926


01530 516 929

Email Address

This email address is being protected from spambots. You need JavaScript enabled to view it.