Products

W030 Spindle Moulder with Sliding Carriage

Sliding Carriage is Included as Standard
Sliding Carriage is Included as Standard 1/2' Routing Collet Included The Controls; On/Off Switch, Spindle Height &, Spindle Lock Cast Iron Sliding Carriage with Guide Fence 100mm Diameter Chip Extraction Outlet Optional - 98mm Diameter Cutterblock Optional - Drum Sanding Kit


EAN: 5060281690456
Common price: £ 699.00 Our price: £ 899.00 (Inc VAT)
(£ 749.17 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
  • Cast Iron Main Table
  • Cast Iron Tenonning Table
  • Cast Iron Cutter Hood
  • 1/2'' Routing Collet Included
  • 4 Speeds; Softwood, Hardwood, Routing, Sanding
  • Maximum Tooling Diameter 160mm
  • Independently Adjustable Fences
  • 100mm Diameter Extraction Outlet

Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is ideally suited to small professional workshops.
A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic recently upgraded spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position.

A simple belt change selects the correct spindle speed for the tooling. The new 4 speed version provides even more versatility;

  • 1500rpm - Drum Sanding *
  • 4500rpm - Moulding Hardwoods
  • 6500rpm - Moulding Softwoods
  • 8500rpm - Routing **

The cutter hood is cast iron with a dust outlet at the centre providing efficient extraction for this machine which can produce a high volume of dust and chips. An extractor with 1000 cubic metres an hour airflow is recommended to cope.
The two aluminium fences are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling.
The sliding carriage consists of a cast iron table with four bearing guides running along an aluminium extrusion. The fence angle can be set accurately between 90 and 45 degrees with a useful stop to quickly return to 90 degrees again. A hold down clamp and a length stop complete the equipment.

Supplied with sliding carriage, Set of spindle shims, 1/2" Routing collet, adjustable height rubber feet, 1.9m power cable and UK 3 pin plug.
Runs off any standard 13amp, 240v electric supply.

Specification

Motor (induction) 1500w, 240v
Main table size 600mm x 400mm
Sliding table size 400mm x 180mm
Spindle diameter 30mm
Speeds 4 (1500, 4500, 6500 & 8500rpm)
Vertical stroke 110mm
Table aperture diameter 160mm
Table aperture depth 50mm
Table height 870mm
Fence size 125mm x 700mm
Dust extraction outlet 100mm
Dimensions (WxDxH) 830mm x 1070mm x 1280mm
Weight 95kg
Assembly Time Required 60 Minutes (Needs 2 People)
Rating Light trade
Warranty 1 Year

 * Drum sanding kit is an optional accessory



 

Related Products:

Spindle Moulder with Sliding Carriage W030 £ 899.00 (Inc VAT)
(£ 749.17 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Cutterblock & Cutters Set CB9830 £ 119.00 (Inc VAT)
(£ 99.17 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Whitehill Rebate Cutter Block 100 x 50 x 30mm WHRCB100 £ 124.80 (Inc VAT)
(£ 104.00 excl VAT)
Product is out of stock.
+
Add to wishlist
Sanding Drum Kit W030SD £ 40.00 (Inc VAT)
(£ 33.33 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Universal Wheel Base W522 £ 69.00 (Inc VAT)
(£ 57.50 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Package Deal: W030 with Cutterblock & Sanding Kit W030P £ 1,008.00 (Inc VAT)
(£ 840.00 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Package Deal: W030, Profile Head, Sanding Kit, Rebate Head, Wheel Kit W030P2 £ 1,167.00 (Inc VAT)
(£ 972.50 excl VAT)
Product is out of stock.
+
Add to wishlist
Igaging Digital Snap Check Gauge 35-0907 £ 27.00 (Inc VAT)
(£ 22.50 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist
Igaging 12" (300mm) Stainless Steel Ruler - Metric & Imperial Units 34-012-N £ 4.50 (Inc VAT)
(£ 3.75 excl VAT)
Product is in stock.
+
Add To Basket Add to wishlist

Customer Reviews:

No comments have been posted yet.

Sign up to our e-mail news service and we’ll keep you up to date with our products, special offers and any demonstration days in you area. You can unsubscribe from our newsletter at any time.

Company Information

Address

Charnwood Machinery Ltd.
Cedar Court, Walker Road,
Hilltop Industrial Estate, Bardon,
Leicestershire, England, LE67 1TU

Phone Number

01530 516 926

Fax

01530 516 929

Email Address

This email address is being protected from spambots. You need JavaScript enabled to view it.